1. Right-click on the sound icon in the Windows system tray. 2. Select "Recording Devices" from the menu. 3. Select your microphone from the list of recording devices. 4. If your microphone is not listed, try plugging it into a different port. 5. Select the "Properties" button. 6. Select the Levels tab. 7. Raise the volume slider to at least halfway. 8. Select "Apply" and then "OK". 9. Open the recording application you are using. 10. Select your microphone as the recording input.

A screenshot in Windows 10 is a digital image of what's currently being displayed on your computer screen. You can take a screenshot by pressing the Print Screen (or PrtScn) key on your keyboard, or by pressing the Windows + PrtScn on your keyboard. You can also take screenshot using the snipping tool application that is included with Windows.

To enable USB write protection on Windows 10, follow these steps: 1. Right-click the Start button and select Run 2. Type regedit and press Enter 3. Navigate to the following location: Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies 4. On the right side of the window, right-click and create a 32-bit DWORD value 5. Name it WriteProtect and set its value to 1 6. Close the Registry Editor and restart your computer 7. Now your USB drive will be write protected.

There are no secret settings built into Windows 10. You may find settings which you did not know existed, but these are not secret. To view all of the available settings, go to Start > Settings > System.

1. Right-click Start and select System. 2. The System menu will open, listing information such as the type of processor, installed RAM and system type. 3. Click Advanced system settings in the left panel to open the System Properties window. 4. The window shows additional information, such as your computer's name, the operating system's version and build number, the computer's owner and the computer's domain.

1. Create a Backup of Your System: Before attempting to upgrade your C Drive, it is strongly advised you create a backup of your system. This can be done to ensure your data is not lost in the process. 2. Copy or Clone Existing C Drive to Another Hard Drive: Once you have created a backup, you need to clone or copy the existing C Drive to another hard drive. You can use a cloning tool such as EaseUS or Norton Ghost to do this. 3. Disconnect Your Existing Hard Drive and Connect the New One: Once you have copied the existing C Drive, you can disconnect the existing hard drive and connect the new one in its place. 4. Format and Partition the New Hard Drive: Once you have connected the new hard drive, you need to format it and partition it by going to Disk Management and creating a new partition. 5. Install and Setup the New C Drive: Once the new C Drive is connected and formatted, you need to install and setup the new C Drive by running the installation program. 6. Reboot: Finally, you need to reboot your system for the changes to take effect. You should now have a new C Drive installed and setup on your Windows 10 or 11 PC.

1. Go to the Start menu and type "Sound" into the search bar and click on the "Sound Settings" option from the results. 2. Once the sound settings menu appears, click on the "Sound Control Panel" option. 3. Within the Sound Properties menu, click on the Sounds tab at the top. 4. Under the Program Events list, find and select the Windows Logon option. 5. Once you have the Windows Logon option selected, in the Sounds tab box below, there is a dropdown list, select the sound that you would like to hear when you log into Windows. 6. Then click Apply and then OK at the bottom to save the change. 7. Restart your computer, and you should now hear the sound you have chosen when you log in.

No, Windows 10 is not making your computer shut down. The cause of a computer's shut-down can be many things such as software or hardware errors. It is best to check the Windows Event Viewer to see if there are any clues to what may be causing the issue.

1. Right-click on the desktop and select Screen Resolution. 2. In the Screen Resolution window, select the drop-down menu next to Resolution. 3. Select the resolution desired from the list of available resolutions. 4. Click OK to apply the change. 5. If necessary, click Keep Changes in the confirmation window.

1. Open the Device Manager by right-clicking on the Start button and selecting Device Manager. 2. Find the Human Interface Devices option and expand it by clicking the plus sign next to it. 3. Find your touchscreen device and double-click it to open its properties. 4. Select the "Driver" tab. 5. Select the "Disable" button to disable the touchscreen. 6. Confirm your selection by clicking Yes when prompted. 7. Reboot your computer to apply the changes.